Product Description
PAC Product introduction:
This product is a kind of inorganic polymer flocculant. Mainly through compression double, adsorption electricity neutralization, adsorption Bridges, sediment trap etc mechanism function, make edema subtle aerosols and colloidal ions off firm, gathered, flocculation, coagulation, precipitation to purify the treatment effect.
Features:
| Items |
Data |
| Apperance |
Solid powder, yellow |
| Al2O3 % |
29 min |
| Basicity % |
50.0~90.0 |
| Insolubles % |
1.5 max |
| pH(1% water solution) |
3.5~5.0 |
| |
|
Polyaluminium Chloride Advantages:
1, Low dosage than Aluminium sulfate, low cost;
2, Quick formation of big flocs and rapid precipitation.
3, Widely adaptablility and good solubility.
4, Slight corrosive and easy for operation.
5, Not block the pipes over long-time usuage.
Polyaluminium Chloride Usuage:
1. For solid PAC, dilution is necessary before being dosed. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage).
2. The specific dosage is based on the flocculation test and on the trail. Normally, the dosage of solid is 1-15g/MT, the dosage of liquid product is 3-40g/MT
3. Its acidity is lower than other inorganic coagulants.
Packing:
25kg/polypropylene woven bags with inner plastic bag.
Lanyao was established since 1998,in the start-up stage, as a watertreatment chemicals distributor, we provided product sales and technical supports for various regional sewage plants in East China.
Since Eastern China has always been a concentrated area for the development of light and heavy industries in the early 20th century, the water qualities of sewage plants in various regions are relatively different and complicated so that the treatment is relatively difficult. Therefore, we usually send technicians to the site and conduct micro-experiments based on detection report on COD,BOD,SS,ammonia nitrogen,total phosphorus,heavy metal and other impurities.As that we can match the appropriate type of chemicals to obtain the best treatment effect.
Until 2006, according to nearly ten years of technology accumulation and research on various types of chemicals, cooperating with experts and professors from various colleges and universities, Lanyao manufacturing-type enterprise was settled in yixing, jiangsu province.
Lanyao produces a wide range of chemicals used in water treatment processes, including coagulants, flocculants, PH adjusters such as polyaluminium chloride, poly ferric sulphate, sodium acetate and polyaluminium ferric chloride, etc. The company is now located in the Chemical Industry Zone in Jiangsu Province, with a factory area of 17,000 square meters and 108 employees.
We have a complete set of production management and quality control systems. We got the 1SO9001 quality system certification in 2012, the ISO14001 environmental system certification in 2014, and the occupational health and safety management system certification in 2016. The company has both advanced equipment and talents, domestic advanced testing equipment, and over 30 years of professional and technical personnel with intermediate and senior titles. In addition, the company has a professional transportation team, and owns 10 liquid PAC tankers and 5 vans, which can fully guarantee the timeliness of product supply.
){kind=link}