Product Description:
Citric acid is colorless or white crystalline particles or powder (with a slight grayish yellow color in the second grade), odorless, extremely sour in taste, easily soluble in water and ethanol, and slightly soluble in ether. The aqueous solution exhibits an acidic reaction, with citric acid monohydrate slightly weathered in dry air.
| Citric Acid |
| Index Item |
Anhydrous Citric Acid |
Monohydrate Citric Acid |
| |
Excellent Grade |
First Grade |
Excellent Grade |
First Grade |
Second Grade |
| Identification Test |
Conforming to the experiment |
Conforming to the experiment |
| Citric Acid Content/% |
99.5-100.5 |
99.5-100.5 |
≥99.0 |
| Transmittance/% ≥ |
98.0 |
96.0 |
98.0 |
95.0 |
-- |
| Moisture/% |
≤0.5 |
7.5-9.0 |
-- |
| Carbonizable Substance ≤ |
1.0 |
1.0 |
-- |
| Sulphated Ash/% ≤ |
0.05 |
0.05 |
0.1 |
| Chloride/% ≤ |
0.005 |
0.005 |
0.01 |
| Sulfate/% ≤ |
0.01 |
0.015 |
0.05 |
| Oxalate/% ≤ |
0.01 |
0.01 |
-- |
| Calcium Salt/% ≤ |
0.02 |
0.02 |
-- |
| Ferric/(mg/kg) ≤ |
5.0 |
5.0 |
-- |
| Arsenic Salt/(mg/kg) ≤ |
1.0 |
1.0 |
-- |
| Heavy Metals (Calculated By Pb)/(mg/kg) ≤ |
5.0 |
5.0 |
-- |
| Water Insolubles |
The filter membrane basically does not change color, and there are no more than 3 visible mottled particles |
The filter membrane basically does not change color, and there are no more than 3 visible mottled particles |
-- |
Product Usage:
Citric acid can be used as buffer, complexing agent, metal cleaner, mordant, gelling agent, toner, etc. It is widely used in electronics, textile, petroleum, leather, architecture, photography, plastics, casting, ceramics and other industrial fields.
Packaging And Storage:
1. The internal packaging materials of the product should comply with the hygiene requirements of food packaging materials. The inner packaging shall be tightly sealed and not breathable, and the outer packaging shall not be contaminated.
2. The product should be handled with care during transportation and strictly protected from pollution, rain, and sun exposure.
3. The means of transportation must be clean, non-toxic, and pollution-free. It is strictly prohibited to mix and transport toxic, harmful, and corrosive substances.
4. The product should be stored in a cool, dry, ventilated and pollution-free environment and should not be stored outdoors. The optimal storage temperature is 30 ° C and the relative humidity is below 50%.
Company Profile
Lanyao was established since 1990,in the start-up stage, as a watertreatment chemicals distributor, we provided product sales and technical supports for various regional sewage plants in East China.
Since Eastern China has always been a concentrated area for the development of light and heavy industries in the early 20th century, the water qualities of sewage plants in various regions are relatively different and complicated so that the treatment is relatively difficult. Therefore, we usually send technicians to the site and conduct micro-experiments based on detection report on COD,BOD,SS,ammonia nitrogen,total phosphorus,heavy metal and other impurities.As that we can match the appropriate type of chemicals to obtain the best treatment effect.
Until 2006, according to nearly ten years of technology accumulation and research on various types of chemicals, cooperating with experts and professors from various colleges and universities, Lanyao manufacturing-type enterprise was settled in yixing, jiangsu province.
Lanyao produces a wide range of chemicals used in water treatment processes, including coagulants, flocculants, PH adjusters such as polyaluminium chloride, poly ferric sulphate, sodium acetate and polyaluminium ferric chloride, etc. The company is now located in the Chemical Industry Zone in Jiangsu Province, with a factory area of 17,000 square meters and 108 employees.
We have a complete set of production management and quality control systems. We got the 1SO9001 quality system certification in 2012, the ISO14001 environmental system certification in 2014, and the occupational health and safety management system certification in 2016. The company has both advanced equipment and talents, domestic advanced testing equipment, and over 30 years of professional and technical personnel with intermediate and senior titles. In addition, the company has a professional transportation team, and owns 10 liquid PAC tankers and 5 vans, which can fully guarantee the timeliness of product supply
FAQ
1:Are you a manufacturer?
Yes, we are a professional manufacturer with more than 20+ years experiences.
2:How to control the Product Quality ?
We have advanced detection technology and equipment, there are special detection personnel, after the production of the product, according to the indicators of the product to do the test, after the test can be packaged, once found unqualified, will punish the production personnel, and find out the reason
3:How can i get a sample ?
Samples is free,but freight charges will be at your account and the charges will be return to you after your order in the future.
4: How do you treat quality complaint ?
First of all, our quality control will reduce the quality problem to near zero. If there is a real quality problem caused by us, we will send you free goods for replacement or refund your loss.
){kind=link}